The 2000 Audi A4 was designed with a composite headlight system, which suggests the bulb requires substitute when it burns out. The composite system takes much less time to interchange than on vehicles with sealed beam headlight techniques, which require the proprietor to vary the whole headlamp. You should purchase substitute headlight bulbs for the 2000 Audi A4 from an auto restore retailer and substitute them your self.
2000 Audi A4 Headlight Bulbs Installation Instructions
1. Take away the rubber protector from the again of the headlight assembly by pulling it off. The protector is designed to maintain water out of the headlight assembly. You will notice the electrical connector plugged into the headlight bulb as soon as the rubber protector is eliminated.
2. Pull the electrical connector off the headlight bulb.
3. Squeeze the 2 ends of the steel retaining wire and rotate it to the facet. The retaining wire holds the bulb in place within the headlight assembly.
4. Slide the outdated headlight bulb out of the headlight assembly and discard it.
5. Insert the brand new headlight bulb into the headlight assembly, taking care to line up the tabs on the bulb with the slots within the headlight assembly.
6. Push the retaining wire again over the headlight bulb. You’ll hear a click on when the retaining wire is correctly put in over the headlight bulb.
7. Plug the electrical connector into the again of the headlight bulb and press the rubber protector again onto the headlight assembly.
8. Repeat Steps 1 by 7 to switch the opposite headlight.
Read more : How to Install Headlight Bulbs on an Audi A4 2000
